inxi tools per accedere alle informazioni di sistema da terminale

Aggiornamento 03/07/2017

inxi è un utile e comodo tools da terminale per accedere in modo completo alle informazioni di sistema.

installare inxi con

su
apt install inxi

Per visualizzare le informazioni di sistema ( alcune informazioni risulteranno filtrate).
si può utilizzare
inxi -F
o
inxi -Fxz
Di seguito le informazioni relative a una Virtual Machine

$ inxi -Fxz
System:    Host: debian8SdaDMZ Kernel: 3.16.0-4-amd64 x86_64 (64 bit) Desktop: N/A Distro: Debian GNU/Linux 8 
Machine:   System: QEMU product: Standard PC (i440FX + PIIX 1996) v: pc-i440fx-2.1
           Mobo: N/A model: N/A Bios: Sea v: 1.7.5-20140531_083030-gandalf date: 04/01/2014
CPU:       Single core AMD Opteron 63xx class CPU (-UP-) cache: 512 KB clocked at 3892 MHz
Graphics:  Card: Red Hat QXL paravirtual graphic card
           Display Server: X.Org 1.19.2 driver: N/A Resolution: 3840x2160@30.00hz
           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.5, 128 bits) GLX Version: 3.0 Mesa 10.3.2
Audio:     Card Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.16.0-4-amd64
Network:   Card: Red Hat Virtio network device driver: virtio-pci
           IF: eth0 state: up speed: N/A duplex: N/A mac: 52:54:00:22:d3:2b
Drives:    HDD Total Size: 21.5GB (43.6% used) ID-1: /dev/vda model: N/A size: 21.5GB
Partition: ID-1: / size: 19G used: 7.9G (45%) fs: ext4 dev: /dev/vda1 
           ID-2: swap-1 size: 0.92GB used: 0.07GB (7%) fs: swap dev: /dev/vda5 
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 100 Uptime: 28 days Memory: 140.9/1000.3MB Client: Shell (bash) inxi: 2.1.28 

Visualizzare le informazioni di base del sistema:

$ inxi -S
CPU~Quad core AMD A8-6600K APU with Radeon HD Graphics (-MCP-) speed/max~2500/3900 MHz Kernel~4.9.0-3-amd64 x86_64 Up~13:09 Mem~8410.4/15311.6MB HDD~5001.0GB(27.9% used) Procs~251 Client~Shell inxi~2.3.5  

Per verificare la presenza nel sistema dei tools utilizzati da inxi digitare:

inxi --recommends
~$ inxi --recommends
inxi will now begin checking for the programs it needs to operate. First a check of the main languages and tools
inxi uses. Python is only for debugging data collection.
---------------------------------------------------------------------------
Bash version: 4.3.30(1)-release
Gawk version: 4.1.1,
Sed version: 
Sudo version: 1.8.10p3
Python version: 2.7.9
---------------------------------------------------------------------------
Test One: Required System Directories (Linux Only).
If one of these system directories is missing, inxi cannot operate:

/proc....................................................................... Present
/sys........................................................................ Present

All the  directories are present.
---------------------------------------------------------------------------
Test Two: Required Core Applications.
If one of these applications is missing, inxi cannot operate:

df (info: partition data)................................................... /bin/df
gawk (info: core tool)...................................................... /usr/bin/gawk
grep (info: string search).................................................. /bin/grep
lspci (info: hardware data)................................................. /usr/bin/lspci
ps (info: process data)..................................................... /bin/ps
readlink.................................................................... /bin/readlink
sed (info: string replace).................................................. /bin/sed
tr (info: character replace)................................................ /usr/bin/tr
uname (info: kernel data)................................................... /bin/uname
uptime...................................................................... /usr/bin/uptime
wc (info: word character count)............................................. /usr/bin/wc

All the  applications are present.
---------------------------------------------------------------------------
Test Three: Script Recommends for Graphics Features.
NOTE: If you do not use X these do not matter (like a headless server). Otherwise, if one of these applications
is missing, inxi will have incomplete output:

glxinfo (info: -G glx info)................................................. /usr/bin/glxinfo
xdpyinfo (info: -G multi screen resolution)................................. /usr/bin/xdpyinfo
xprop (info: -S desktop data)............................................... /usr/bin/xprop
xrandr (info: -G single screen resolution).................................. /usr/bin/xrandr

All the  applications are present.
---------------------------------------------------------------------------
Test Four: Script Recommends for Remaining Features.
If one of these applications is missing, inxi will have incomplete output:

dmidecode (info: -M if no sys machine data; -m memory)...................... /usr/sbin/dmidecode
file (info: -o unmounted file system)....................................... /usr/bin/file
hddtemp (info: -Dx show hdd temp)........................................... /usr/sbin/hddtemp
ifconfig (info: -i ip lan-deprecated)....................................... /sbin/ifconfig
ip (info: -i ip lan)........................................................ /bin/ip
sensors (info: -s sensors output)........................................... /usr/bin/sensors
strings (info: -I sysvinit version)......................................... /usr/bin/strings
lsusb (info: -A usb audio;-N usb networking)................................ /usr/bin/lsusb
modinfo (info: -Ax,-Nx module version)...................................... /sbin/modinfo
runlevel (info: -I runlevel)................................................ /sbin/runlevel
sudo (info: -Dx hddtemp-user;-o file-user).................................. /usr/bin/sudo

All the  applications are present.
---------------------------------------------------------------------------
Test Five: System Directories for Various Information.
If one of these directories is missing, inxi will have incomplete output:

/sys/class/dmi/id (info: -M system, motherboard, bios)...................... Present
/dev (info: -l,-u,-o,-p,-P,-D disk partition data).......................... Present
/dev/disk/by-label (info: -l,-o,-p,-P partition labels)..................... Missing
/dev/disk/by-uuid (info: -u,-o,-p,-P partition uuid)........................ Present
/var/run/dmesg.boot (info: -C,-f (BSD only))................................ Missing

The following directories are missing from your system:
Directory: /dev/disk/by-label
Directory: /var/run/dmesg.boot
---------------------------------------------------------------------------
All tests completed.

Visualizzare le informazioni relative alla Cpu:

$ inxi -G
CPU:       Quad core AMD A8-6600K APU with Radeon HD Graphics (-MCP-) cache: 8192 KB 
           clock speeds: max: 3900 MHz 1: 2500 MHz 2: 3900 MHz 3: 3000 MHz 4: 3000 MHz

Visualizzare le informazioni relative al PC Model o Laptop:

$ inxi -M
Machine:   System: QEMU product: Standard PC (i440FX + PIIX 1996) v: pc-i440fx-2.1
           Mobo: N/A model: N/A Bios: Sea v: 1.7.5-20140531_083030-gandalf date: 04/01/2014

Visualizzare le informazioni relative alla Scheda Grafca:

$ inxi -G
Graphics:  Card: Advanced Micro Devices [AMD/ATI] Richland [Radeon HD 8570D]
           Display Server: X.Org 1.19.2 drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
           Resolution: 3840x2160@30.00hz
           GLX Renderer: Gallium 0.4 on AMD ARUBA (DRM 2.48.0 / 4.9.0-3-amd64, LLVM 3.9.1)
           GLX Version: 3.0 Mesa 13.0.6

Visualizzare le informazioni relative alla Scheda Grafica con extra data (-xx) :

$ inxi -Gxx
Graphics:  Card: Advanced Micro Devices [AMD/ATI] Richland [Radeon HD 8570D] bus-ID: 00:01.0 chip-ID: 1002:990e
           Display Server: X.Org 1.19.2 drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
           Resolution: 3840x2160@30.00hz
           GLX Renderer: Gallium 0.4 on AMD ARUBA (DRM 2.48.0 / 4.9.0-3-amd64, LLVM 3.9.1)
           GLX Version: 3.0 Mesa 13.0.6 Direct Rendering: Yes

Visualizzare le informazioni relative alla Scheda Audio :

$ inxi -A
Audio:     Card-1 Advanced Micro Devices [AMD] FCH Azalia Controller driver: snd_hda_intel
           Card-2 Advanced Micro Devices [AMD/ATI] Trinity HDMI Audio Controller driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k4.9.0-3-amd64

Visualizzare le informazioni relative alle interfacce di rete :

$ inxi -N
Network:   Card-1: Intel 82571EB Gigabit Ethernet Controller driver: e1000e
           Card-2: Intel 82571EB Gigabit Ethernet Controller driver: e1000e
           Card-3: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169

Visualizzare le informazioni relative alle interfacce di rete :

$ inxi -Nni
Network:   Card-1: Intel 82571EB Gigabit Ethernet Controller driver: e1000e
           IF: enp1s0f0 state: up speed: 1000 Mbps duplex: full mac: 00:1f:39:62:a3:a8
           Card-2: Intel 82571EB Gigabit Ethernet Controller driver: e1000e
           IF: enp1s0f1 state: up speed: 1000 Mbps duplex: full mac: 00:1f:39:622:a4:a9
           Card-3: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
           IF: enp2s0 state: down mac: 4d:d3:7e:51:f9:0f
           WAN IP: 93.14.22.82 IF: enp2s0 ip-v4: N/A
           IF: enp1s0f0 ip-v4: 192.168.10.98 IF: enp1s0f1 ip-v4: 192.168.75.82

Visualizzare le informazioni relative alle partizioni:

$ inxi -plu
Partition  ID-1: / size: 45G used: 37G (87%) fs: ext4 dev: /dev/sda4
           label: N/A uuid: d175902a-5676-4d26-849a-1c708af8175e
           ID-2: /media/Home_Dati size: 498G used: 311G (66%) fs: ext4 dev: /dev/sda10
           label: Home_Dati uuid: 18fb5ac8-7b21-4338-9f22-684101996fae
           ID-3: /media/ArchivioR size: 998G used: 917G (97%) fs: ext4 dev: /dev/sda14
           label: ArchivioR uuid: 53a08c42-b4a5-4bc1-ac13-6d18c708c881
           ID-4: swap-1 size: 35.65GB used: 0.00GB (0%) fs: swap dev: /dev/sda15
           label: N/A uuid: 34d36ac2-eab9-48c7-8797-5fbc19e97610

Visualizzare le informazioni relative ai dischi :

$ inxi -D
Drives:    HDD Total Size: 5001.0GB (27.8% used)
           ID-1: /dev/sdc model: WDC_WD20EARX size: 2000.4GB
           ID-2: /dev/sda model: WDC_WD20EFRX size: 2000.4GB
           ID-3: /dev/sdb model: WDC_WD1003FBYX size: 1000.2GB

Visualizzare le informazioni relative alle partizioni di sistema:

$ inxi -P
Partition: ID-1: / size: 45G used: 37G (88%) fs: ext4 dev: /dev/sda4
           ID-2: swap-1 size: 35.65GB used: 0.00GB (0%) fs: swap dev: /dev/sda15

Visualizzare le informazioni relative alle partizioni per le quali è stato effettuato il mount :

$ inxi -p
Partition: ID-1: / size: 45G used: 37G (88%) fs: ext4 dev: /dev/sda4
           ID-2: /media/ArchivioR size: 998G used: 917G (97%) fs: ext4 dev: /dev/sda14
           ID-3: /media/Home_Dati size: 498G used: 311G (66%) fs: ext4 dev: /dev/sda10
           ID-4: /media/maurizio/Backup size: 95G used: 1.8G (2%) fs: ext4 dev: /dev/sdb14
           ID-5: swap-1 size: 35.65GB used: 0.00GB (0%) fs: swap dev: /dev/sda15

Visualizzare le informazioni relative al Kernel e alla distribuzione:

$ inxi -I
System:    Host: debian8SdaDMZ Kernel: 3.16.0-4-amd64 x86_64 (64 bit) Desktop: N/A Distro: Debian GNU/Linux 8 

Visualizzare ad esempio gli 8 processi che utilizzano più cpu e memoria

$ inxi -t cm8
Processes: CPU: % used - top 8 active
           1: cpu: 97.2% command: kaffeine pid: 8195
           2: cpu: 10.2% command: chromium pid: 19923
           3: cpu: 9.0% command: vivaldi-bin pid: 7980
           4: cpu: 8.3% command: Xorg pid: 658
           5: cpu: 7.9% command: WebKitWebProcess pid: 1661
           6: cpu: 7.6% command: chromium pid: 14797
           7: cpu: 6.4% command: WebKitWebProcess pid: 1754
           8: cpu: 5.4% command: WebKitWebProcess pid: 1655
           Memory: MB / % used - Used/Total: 8478.9/15311.6MB - top 8 active
           1: mem: 486.73MB (3.1%) command: WebKitWebProcess pid: 1671
           2: mem: 478.17MB (3.1%) command: WebKitWebProcess pid: 1655
           3: mem: 463.81MB (3.0%) command: WebKitWebProcess pid: 1664
           4: mem: 409.91MB (2.6%) command: WebKitWebProcess pid: 1720
           5: mem: 389.95MB (2.5%) command: thunderbird pid: 23880
           6: mem: 381.14MB (2.4%) command: WebKitWebProcess pid: 1754
           7: mem: 380.36MB (2.4%) command: WebKitWebProcess pid: 1758
           8: mem: 358.09MB (2.3%) command: chromium pid: 24143

Visualizzare i 5 processi che utilizzano più cpu:

$ inxi -t c
           1: cpu: 96.6% command: kaffeine pid: 8195
           2: cpu: 9.7% command: chromium pid: 19923
           3: cpu: 9.0% command: vivaldi-bin pid: 7980
           4: cpu: 8.1% command: Xorg pid: 658
           5: cpu: 7.9% command: WebKitWebProcess pid: 1661

Visualizzare i 5 processi che utilizzano più memoria:

$ inxi -t m
Processes: Memory: MB / % used - Used/Total: 8397.6/15311.6MB - top 5 active
           1: mem: 488.50MB (3.1%) command: WebKitWebProcess pid: 1671
           2: mem: 484.13MB (3.1%) command: WebKitWebProcess pid: 1655
           3: mem: 455.39MB (2.9%) command: WebKitWebProcess pid: 1664
           4: mem: 409.91MB (2.6%) command: WebKitWebProcess pid: 1720
           5: mem: 389.22MB (2.5%) command: thunderbird pid: 23880

Visualizzare la temperatura e la velocità delle ventole:

$ inxi s
Sensors:   System Temperatures: cpu: 60.1C mobo: N/A gpu: 35.0
           Fan Speeds (in rpm): cpu: N/A

Volendo è possibile visualizzare informazioni meterelogiche anche se l’ API non è molto affidabile

$ inxi -w
Weather:   Conditions: 34 F (1 C) - Clear Time: January 2, 11:01 PM CET

Visualizzare i repository

$ inxi -r
Repos:     Active apt sources in file: /etc/apt/sources.list
           deb http://ftp.it.debian.org/debian/ jessie main
           deb-src http://ftp.it.debian.org/debian/ jessie main
           deb http://security.debian.org/ jessie/updates main
           deb-src http://security.debian.org/ jessie/updates main
           deb http://ftp.it.debian.org/debian/ jessie-updates main
           deb-src http://ftp.it.debian.org/debian/ jessie-updates main
           Active apt sources in file: /etc/apt/sources.list.d/docker.list
           deb https://apt.dockerproject.org/repo debian-jessie main

Inxi le opzioni disponibili

inxi -H 
inxi supports the following options. You can combine them, or list them one by one. Examples: inxi -v4 -c6 OR
inxi -bDc 6. If you start inxi with no arguments, it will show the short form.
 
The following options if used without -F, -b, or -v will show just option line(s): A, C, D, G, I, M, N, P, R, S,
f, i, n, o, p, l, u, r, s, t - you can use these alone or together to show just the line(s) you want to see. If
you use them with -v [level], -b or -F, it will show the full output for that line along with the output for the
chosen verbosity level.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Output Control Options:
-A     Audio/sound card information.
-b     Basic output, short form. Like inxi -v 2, only minus hard disk names.
-c     Color schemes. Scheme number is required. Color selectors run a color selector option prior to inxi
       starting which lets you set the config file value for the selection.
       Supported color schemes: 0-32 Example: inxi -c 11
       Color selectors for each type display (NOTE: irc and global only show safe color set):
         94  Console, out of X
         95  Terminal, running in X - like xTerm
         96  Gui IRC, running in X - like Xchat, Quassel, Konversation etc.
         97  Console IRC running in X - like irssi in xTerm
         98  Console IRC not in  X
         99  Global - Overrides/removes all settings. Setting specific removes global.
-C     CPU output, including per CPU clockspeed (if available).
-d     Optical drive data. Same as -Dd. See also -x and -xx.
-D     Full hard Disk info, not only model, ie: /dev/sda ST380817AS 80.0GB. See also -x and -xx. Disk total used
       percentage includes swap partition size(s).
-f     All cpu flags, triggers -C. Not shown with -F to avoid spamming. ARM cpus show 'features'.
-F     Full output for inxi. Includes all Upper Case line letters, plus -s and -n. Does not show extra verbose
       options like -x -d -f -u -l -o -p -t -r
-G     Graphic card information (card, display server type/version, resolution, glx renderer, version).
-i     Wan IP address, and shows local interfaces (requires ifconfig network tool). Same as -Nni. Not shown with
       -F for user security reasons, you shouldn't paste your local/wan IP.
-I     Information: processes, uptime, memory, irc client (or shell type), inxi version.
-l     Partition labels. Default: short partition -P. For full -p output, use: -pl (or -plu).
-M     Machine data. Motherboard, Bios, and if present, System Builder (Like Lenovo). Older systems/kernels
       without the required /sys data can use dmidecode instead, run as root. Dmidecode can be forced with -! 33
-n     Advanced Network card information. Same as -Nn. Shows interface, speed, mac id, state, etc.
-N     Network card information. With -x, shows PCI BusID, Port number.
-o     Unmounted partition information (includes UUID and LABEL if available). Shows file system type if you have
       file installed, if you are root OR if you have added to /etc/sudoers (sudo v. 1.7 or newer)
       Example:  ALL = NOPASSWD: /usr/bin/file  
-p     Full partition information (-P plus all other detected partitions).
-P     Basic partition information (shows what -v 4 would show, but without extra data). Shows, if detected: /
       /boot /home /tmp /usr /var. Use -p to see all mounted partitions.
-r     Distro repository data. Supported repo types: APT; PACMAN; PISI; YUM; URPMQ; Ports.
-R     RAID data. Shows RAID devices, states, levels, and components, and extra data with -x/-xx. md-raid: If
       device is resyncing, shows resync progress line as well.
-s     Sensors output (if sensors installed/configured): mobo/cpu/gpu temp; detected fan speeds. Gpu temp only
       for Fglrx/Nvidia drivers. Nvidia shows screen number for > 1 screens.
-S     System information: host name, kernel, desktop environment (if in X), distro
-t     Processes. Requires extra options: c (cpu) m (memory) cm (cpu+memory). If followed by numbers 1-20, shows
       that number of processes for each type (default: 5; if in irc, max: 5): -t cm10
       Make sure to have no space between letters and numbers (-t cm10 - right, -t cm 10 - wrong).
-u     Partition UUIDs. Default: short partition -P. For full -p output, use: -pu (or -plu).
-v     Script verbosity levels. Verbosity level number is required. Should not be used with -b or -F
       Supported levels: 0-7 Example: inxi -v 4
         0   Short output, same as: inxi
         1   Basic verbose, -S + basic CPU + -G + basic Disk + -I.
         2   Networking card (-N), Machine (-M) data, shows basic hard disk data (names only), and, if present,
             basic raid (devices only, and if inactive, notes that). similar to: inxi -b
         3   Advanced CPU (-C), network (-n) data, and switches on -x advanced data option.
         4   Partition size/filled data (-P) for (if present): /, /home, /var/, /boot. Shows full disk data (-D).
         5   Audio card (-A); sensors (-s), partition label (-l) and UUID (-u), short form of optical drives,
             standard raid data (-R).
         6   Full partition (-p), unmounted partition (-o), optical drive (-d), full raid; triggers -xx.
         7   Network IP data (-i); triggers -xxx.
-w     Local weather data/time. To check an alternate location, see: -W . For extra weather data
       options see -x, -xx, and -xxx.
-W      Supported options for : postal code; city, state/country; latitude/longitude. Only
       use if you want the weather somewhere other than the machine running inxi. Use only ascii characters,
       replace spaces in city/state/country names with '+'. Example: inxi -W new+york,ny
-x     Adds the following extra data (only works with verbose or line output, not short form):
         -C  CPU Flags, Bogomips on Cpu;
         -d  Extra optical drive data; adds rev version to optical drive.
         -D  Hdd temp with disk data if you have hddtemp installed, if you are root OR if you have added to
             /etc/sudoers (sudo v. 1.7 or newer) Example:  ALL = NOPASSWD: /usr/sbin/hddtemp
         -G  Direct rendering status for Graphics (in X).
         -G  (for single gpu, nvidia driver) screen number gpu is running on.
         -i  IPv6 as well for LAN interface (IF) devices.
         -I  System GCC, default. With -xx, also show other installed GCC versions. If running in console, not in
             IRC client, shows shell version number, if detected. Init/RC Type and runlevel (if available).
      -N -A  Version/port(s)/driver version (if available) for Network/Audio;
   -N -A -G  Network, audio, graphics, shows PCI Bus ID/Usb ID number of card.
         -R  md-raid: Shows component raid id. Adds second RAID Info line: raid level; report on drives (like
             5/5); blocks; chunk size; bitmap (if present). Resync line, shows blocks synced/total blocks.
             zfs-raid: Shows raid array full size; available size; portion allocated to RAID
         -S  Desktop toolkit if avaliable (GNOME/XFCE/KDE only); Kernel gcc version
         -t  Memory use output to cpu (-xt c), and cpu use to memory (-xt m).
      -w -W  Wind speed and time zone (-w only).
-xx    Show extra, extra data (only works with verbose or line output, not short form):
         -A  Chip vendor:product ID for each audio device.
         -D  Disk serial number.
         -G  Chip vendor:product ID for each video card.
         -I  Other detected installed gcc versions (if present). System default runlevel. Adds parent program (or
             tty) for shell info if not in IRC (like Konsole or Gterm). Adds Init/RC (if found) version number.
         -M  Chassis information, bios rom size (dmidecode only), if data for either is available.
         -N  Chip vendor:product ID for each nic.
         -R  md-raid: Superblock (if present); algorythm, U data. Adds system info line (kernel support,read
             ahead, raid events). If present, adds unused device line. Resync line, shows progress bar.
         -S  Display manager (dm) in desktop output, if in X (like kdm, gdm3, lightdm).
      -w -W  Humidity, barometric pressure.
   -@ 11-14  Automatically uploads debugger data tar.gz file to ftp.techpatterns.com. EG: inxi -xx@14
-xxx   Show extra, extra, extra data (only works with verbose or line output, not short form):
         -S  Panel/shell information in desktop output, if in X (like gnome-shell, cinnamon, mate-panel).
      -w -W  Location (uses -z/irc filter), weather observation time, wind chill, heat index, dew point (shows
             extra lines for data where relevant).
-y     Required extra option: integer, 80 or greater. Set the output line width max. Overrides IRC/Terminal
       settings or actual widths. If used with -h, put -y option first. Example: inxi -y 130
-z     Security filters for IP/Mac addresses, location, user home directory name. Default on for irc clients.
-Z     Absolute override for output filters. Useful for debugging networking issues in irc for example.
 
Additional Options:
-h --help      This help menu.
-H             This help menu, plus developer options. Do not use dev options in normal operation!
--recommends   Checks inxi application dependencies + recommends, and directories, then shows what package(s) you
               need to install to add support for that feature.
-V --version   inxi version information. Prints information then exits.
 
Debugging Options:
-%     Overrides defective or corrupted data.
-@     Triggers debugger output. Requires debugging level 1-14 (8-10 - logging of data). Less than 8 just
       triggers inxi debugger output on screen.
         1-7 On screen debugger output
         8   Basic logging
         9   Full file/sys info logging
         10  Color logging.
       The following create a tar.gz file of system data, plus collecting the inxi output to file. To
       automatically upload debugger data tar.gz file to ftp.techpatterns.com: inxi -xx@ <11-14>
       For alternate ftp upload locations: Example: inxi -! ftp.yourserver.com/incoming -xx@ 14
         11  With data file of xiin read of /sys.
         12  With xorg conf and log data, xrandr, xprop, xdpyinfo, glxinfo etc.
         13  With data from dev, disks, partitions, etc., plus xiin data file.
         14  Everything, full data collection.
 
Advanced Options:
-! 31  Turns off hostname in output. Useful if showing output from servers etc.
-! 32  Turns on hostname in output. Overrides global B_SHOW_HOST='false'
-! 33  Forces use of dmidecode data instead of /sys where relevant (-M).


Risorse

Annunci

Rispondi

Inserisci i tuoi dati qui sotto o clicca su un'icona per effettuare l'accesso:

Logo WordPress.com

Stai commentando usando il tuo account WordPress.com. Chiudi sessione / Modifica )

Foto Twitter

Stai commentando usando il tuo account Twitter. Chiudi sessione / Modifica )

Foto di Facebook

Stai commentando usando il tuo account Facebook. Chiudi sessione / Modifica )

Google+ photo

Stai commentando usando il tuo account Google+. Chiudi sessione / Modifica )

Connessione a %s...